Low-pressure mercury discharge lamps with a tubular 26 mm envelope and argon gas filling
Relatively high efficacy, both initially and during lamp lifetime, with high lumen maintenance
Good colour rendering
Creates atmospheres from warm white to cool daylight
Highly efficient 3-band fluorescent coating in combination with New Generation pre-coating technology
High initial lumen output
Available in varying colour designations
Low mercury dose
MASTER TL-D lamps are fully recyclable
End-cap has green bottom plate to identify lamp as recyclable
Suitable for use in a wide range of luminaires for TL-D fluorescent lamps for 'human' applications such as schools, offices, shops, factory halls etc.
Warning & Safety
Special electronic gear must be used
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.