All lamps burn out eventually, but when this happens with single ended MSR Gold™ FastFit, it is replaced in seconds – thanks to the specially designed lamp base and lamp holder. This lamp provides a high beam intensity of pure, white light for a truly illuminating performance, while the gold-plated caps provide superior heat protection and prevent premature failure. P3 technology allows use in any position and at higher temperatures, further extending lamp life and consistency of high-quality light output. Also, because the FastFit design is applied to Philips Halogen lamps, switching between lamp technologies can be done quickly and easily. The Philips MSR GoldTM FastFit can be operated in a lamp wattage range between 700W and 2500W.
Lamp replacement in just seconds, exchangeable with halogen lamp
High beam intensity
Easy handling, smaller and lighter fixtures possible
Boostable light levels
Enables use at higher temperatures in any burning position. Longer lifetime, fewer early failures, consistent performance over time
Reduces early lamp or lamp holder failures. Excellent current transfer
Pure, white light; colour point close to black body line
Very short arc
Flexible power range
Philips pinch protection
Innovative gold plated pins
The Philips MSR GoldTM 1200 FastFit can be operated in a lamp wattage range between 800W and 1400W.
Warning & Safety
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.