Product family information

        Striking the right balance between the different lighting needs in a patient room is a challenge for many hospitals. That’s why our bed-head luminaires offer some of the key functionalities required by both patients and staff. The SmartBalance, wall-mounted luminaire combines high-quality lighting performance with a stylish, timeless design. General ambience light is provided indirectly via the upper part of the luminaire. The lower part delivers direct, diffuse light, allowing patients to read and clinical staff to carry out examinations at the bed.


        Elegant, slim design
        Delivers patient-room illumination levels
        Energy savings and long lifetime


        Slim design: lower in height than competitor models
        Compliant with lighting norms for patient rooms and corridors
        Appealing, timeless design
        Flexible mounting, both electrical and mechanical
        State-of-the-art LED technology
        Configurator approach to meet a range of hospital requirements


        Patient rooms
        Product family details
        • WL484W
        Light source
        • Philips Fortimo LED Line 1R
        • 32.7 to 45 W (depending on type)
        Beam angle
        • Asymmetrical beam
        Luminous flux
        • 4,000 or 5,200 lm (downlight versions)
        • 4,400 or 4,600 lm (uplight versions)
        Correlated Colour Temperature
        • 3,000 or 4,000 K
        Colour Rendering Index
        • >80
        Lumen maintenance at median useful life* 50,000 h
        • L80
        Control gear failure rate at median useful life 50,000 h
        • 5%
        Performance Ambient Temperature Tq
        • +25 ºC
        Operating temperature range
        • -20 to +30 ºC
        • Built-in
        Mains voltage
        • 230 or 240 V/50-60 Hz
        • DALI dimmable
        • EFE relay, nightlight
        • Housing: aluminium
        • Optic: PMMA
        • Silver grey (comparable to RAL 9006)
        • White (RAL 9003)
        • Screw mounting, directly onto surface
        • Through-wiring not possible
        • Add product
        • Add product
        • Add product
        Add product

        Cannot find what you're looking for?
        Perhaps one of these links might help

        Contact us   
        Distributor or partner finder